Q5 Quattro V6-3.2L (CALB) (2009)
Exhaust Pipe: Service and Repair
Tail Pipe
Special tools, testers and auxiliary items required
‹› Chain pipe cutter (VAS 6254)
Procedure
‹› Tightening specifications, refer to => [ Muffler Assembly Overview ] See: Muffler/Service and Repair/Muffler Assembly Overview.
-
Separate end pipe - 1 - at separating point - C - using Chain Pipe Cutter (VAS 6254).
-
Connect end pipe - 3 - up to marking - A - so that slot on end pipe lines up with marking - B -.
-
Tighten clamping sleeve nut - 2 -.