Q5 Quattro V6-3.2L (CALB) (2009)
Dashboard / Instrument Panel: Service and Repair
Center Instrument Panel Vent
Center Instrument Panel Vent
Special tools, testers and auxiliary items required
‹› Hook (3438)
Removing
‹› The instrument panel vent has a hole - arrow - on both sides for attaching the hook (3438).
-
Alternating on both sides, carefully remove the instrument panel vent - 1 - from the installation opening using the hook (3438).
-
Versions with lighting: Disconnect the electrical connector on the instrument panel vent.
Installing
Installation is reverse of removal, but note the following:
‹› Check the clips for damage or deformation and replace them if necessary.
-
When sliding the instrument panel vent into the installation opening, make sure the air duct engages correctly.
-
Press the instrument panel vent into the installation opening as far as the stop.