Q5 Quattro V6-3.2L (CALB) (2009)
Do not damage any parts!
-
Tighten bolts - 2 - and - 3 - to the specifications.
-
Install the new bolts - 1 - and - 4 - one after another and tighten. Refer to => [ Subframe, Crossbrace, Stabilizer Bar, Coupling Rod and Subframe
Shield Assembly Overview ] See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Suspension/Subframe, Crossbrace,
Stabilizer Bar, Coupling Rod and Subframe Shield Assembly Overview.
-
Install the new bolts - 2 - and - 3 - one after another and tighten. Refer to => [ Subframe, Crossbrace, Stabilizer Bar, Coupling Rod and Subframe
Shield Assembly Overview ] See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Suspension/Subframe, Crossbrace,
Stabilizer Bar, Coupling Rod and Subframe Shield Assembly Overview.
-
Install the new bolts - 8 - and - 5 - one after another and tighten. Refer to => [ Subframe, Crossbrace, Stabilizer Bar, Coupling Rod and Subframe
Shield Assembly Overview ] See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Suspension/Subframe, Crossbrace,
Stabilizer Bar, Coupling Rod and Subframe Shield Assembly Overview.
-
Install the new bolts - 7 - and - 6 - one after another and tighten. Refer to => [ Subframe, Crossbrace, Stabilizer Bar, Coupling Rod and Subframe
Shield Assembly Overview ] See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Suspension/Subframe, Crossbrace,
Stabilizer Bar, Coupling Rod and Subframe Shield Assembly Overview.
-
Tighten tunnel crossmember.
-
Check camber value once more.
-
Install the right protective joint boot and the wheel housing fastener, if removed.
-
Install subframe shield, if it was removed. Tightening specifications. Refer to: => [ Subframe, Crossbrace, Stabilizer Bar, Coupling Rod and
Subframe Shield Assembly Overview ] See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Suspension/Subframe,
Crossbrace, Stabilizer Bar, Coupling Rod and Subframe Shield Assembly Overview.