Q5 Quattro V6-3.2L (CALB) (2009)
Subsequent procedures are performed using the Vehicle Diagnosis, Testing and Information System.
-
Switch on ignition.
-
Touch Guided Fault Finding on screen.
-
Select one after another:
‹› Brand
‹› Model
‹› Model year
‹› Version
‹› Engine code
-
Confirm data entered.
Wait until the Vehicle Diagnosis, Test and Information System has checked all available control modules in vehicle.
-
Press Sprung (Go to) button and select "Function/Component Selection" function.
-
Select the corresponding program in "Guided Functions".
Now follow the instructions on the screen to perform the calibration.
‹› A step is performed in Guided Fault Finding next to determine the body height.
-
Determine the body height - a - at all four wheels in the center of the wheel between the wheel contact surface and the lower edge of the fender.