Q5 Quattro V6-3.2L (CALB) (2009)
/Page-425004.png)
Tightening specification => [ Adaptive Cruise Control Sensor Assembly Overview ] See: Procedures/Adaptive Cruise Control Sensor Assembly
Overview
-
Install the Adaptive Cruise Control Sensor (G550 ) and carefully push the nuts by hand onto the threaded pins in the sensor.
-
Install the air intake grille. Refer to => Body Exterior
63 Removal and Installation.
-
Calibrate the adaptive cruise control. Refer to => [ Adjustment Procedure Using ACC Setting Device ] See: Procedures/Adjustment Procedure
Using ACC Setting Device.