Q5 Quattro V6-3.2L (CALB) (2009)
Installing
-
Installation is carried out in the reverse order, when doing this note the following.
-
Clean the A/C unit via the shaft -B- (e.g. using a vacuum cleaner) after removing the dust and pollen filter -A-.
-
Install the dust and pollen filter -A- on the correct side (the angle -C- on the side facing the fresh air blower -D-)
-
The dust and pollen filter -A- for this vehicle does not have a specific flow direction (the same filter is installed in left-hand and right-hand drive
vehicles).
-
There are different versions of the dust and pollen filter, without and with a filter insert with activated charcoal; make sure the correct version is
installed).