Q5 Quattro V6-3.2L (CALB) (2009)
Fluid Filter - A/T: Removal and Replacement
ATF Cooler, ATF Pipes and ATF Filter Assembly Overview
ATF Cooler, ATF Pipes and ATF Filter Assembly Overview
‹› General repair notes. Refer to => [ Repair Information ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and
Repair/Procedures/0B5A Transmission/Repair Information.
‹› Rules for cleanliness when working on the DSG transmission. refer to => [ Clean Working Conditions ] See: Transmission and
Drivetrain/Automatic Transmission/Transaxle/Service Precautions/0B5A Transmission/Clean Working Conditions.
‹› The ATF pipe guide from a 3.0L TDI engine is shown in the illustration.
1
ATF cooler
‹› Integrated in cooler
2
O-Ring
‹› Replace
‹› Coat with ATF before inserting
3
ATF pipe - hose line - return
‹› First insert the ATF pipe-hose lines with new O-rings by hand as far as the stop
‹› Cleaning, refer to => [ ATF Lines and Cooler, Cleaning ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Transmission
Cooler/Service and Repair/Procedures