Q5 Quattro V6-3.2L (CALB) (2009)
Fuse Block: Service and Repair
3-Pin Relay/Fuse Panel
3-Pin Relay/Fuse Panel
Removing
-
Switch off ignition and remove ignition key.
-
Remove driver storage compartment.
-
Disengage the 3-pin relay/fuse panel by pressing the retaining springs in the - direction of the arrow - and remove the relay/fuse panel - 1 -.
-
Unclip the fuse panel from the relay/fuse carrier.
-
Remove the relay and control modules.
-
Release the retaining clips - arrows - and press the relay carrier - 2 - back and out of the bracket - 1 -.