Q5 Quattro V6-3.2L (CALB) (2009)
/Page-535002.png)
Install in reverse order of removal, observing the following:
‹› Tightening specification. Refer to => [ Relay/Fuse Panel Mount Tightening Specifications ] See: Relay Carrier and Fuse Panel in Instrument Panel
and A-Pillar Assembly Overview.
-
Engage the retaining pins - 1 - on the mount - 3 - at the side guide in the A-pillar - arrow -.
-
Tighten the nut - 2 -.
-
Install the air duct to the left instrument panel vent.
-
Install the instrument panel.
