Q5 Quattro V6-3.2L (CALB) (2009)
/Page-456004.png)
-
Check O-ring seals for proper seating in grooves - arrows - on respective mount.
-
Check the fitting pin - A - (not installed on all connections) and refrigerant line connections - B - - E - and - F - for damage and proper seating.
-
Tighten the screws - D -.
‹› Tightening specification: 9 Nm.
-
Install the cover on the lock carrier.
-
Evacuate and fill the refrigerant circuit. Refer to => Refrigerant R134a - Servicing.
-
Install the remaining components.
-
Check Diagnostic Trouble Code (DTC) memory of A/C control head climatronic control module (J255) and erase any displayed malfunction if
necessary. Refer to => Vehicle Diagnosis, Testing and Information System VAS 5051 in "Guided Fault Finding" function.
-
Operate the A/C system after filling the refrigerant circuit. Refer to => [ A/C System, Operating after Filling Refrigerant Circuit ] See: Heating and
Air Conditioning/Service and Repair/Procedures/A/C System, Operating after Filling Refrigerant Circuit.
‹› Note the information regarding operating the A/C system after filling. Refer to => Refrigerant R134a - Servicing.
