Q5 Quattro V6-3.2L (CALB) (2009)
Tire Pressure Module: Service and Repair
Directional Stabilization Assistance Control Module and Lens Screen
Directional Stabilization Assistance Control Module and Lens Screen
Removing
-
Remove cover trim - 1 - down from the bracket in direction of - arrow -.
-
Press the retaining clamp - 1 - in direction of - arrow - and remove the Directional Stabilization Assistance Control Module (J759) sideways and
down from the bracket.
-
Disconnect the electrical connector and remove the Directional Stabilization Assistance Control Module (J759).
-
Press the clamps - arrows -, pull the lens screen out of the bracket and remove it toward the rear.