Q5 Quattro V6-3.2L (CALB) (2009)
Fuse Block: Service and Repair
Fuse Panel in Engine Compartment E-Box
Fuse Panel in Engine Compartment E-Box
Removing
-
Remove the fuse panel B (SB) Refer to => [ Fuse Panel B in Engine Compartment E-Box ] See: Fuse Panel B in Engine Compartment E-Box.
‹› The relay - 3 - and - 4 - fuse holder - 1 - remain clipped on.
‹› The electrical wire - 5 - remains connected.
-
Release the retaining clip - arrow - and push the fuse panel - 2 - back and out and disengage it.
-
Remove the fuses from the fuse panel.
-
Release retaining clips - arrows - and remove the cover from the fuse panel.
-
Pull off retaining strip - 1 - for harness connectors - arrow - and remove harness connectors from connector socket.