Q5 Quattro V6-3.2L (CALB) (2009)
Fuse Block: Service and Repair
Fuse Panel D with Right Instrument Panel Fuse Panel
Fuse Panel D with Right Instrument Panel Fuse Panel
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
Removing
-
Switch off ignition and remove ignition key.
-
Remove the glove compartment.
-
Pry the instrument panel side cover off with the trim removal wedge (3409) - arrow - and remove it.
-
Remove the instrument panel CAN cut-off connector (T46s) mount - 4 -. Refer to => [ Instrument Panel CAN Cut-Off Connector Mount ] See:
Powertrain Management/Computers and Control Systems/Information Bus/Service and Repair/Instrument Panel CAN Cut-Off Connector Mount.