Q5 Quattro V6-3.2L (CALB) (2009)
-
Release the retaining clips - arrows - and press the relay carrier - 2 - back and out of the bracket - 1 -.
‹› For the exact assignment of the passenger side A-pillar 6-pin connector station, see the applicable wiring diagram.
Installing
Install in reverse order of removal, observing the following:
-
Install the lower right A-pillar trim panel..
-
Connect battery. Refer to => [ Battery, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and Repair/Removal and
Replacement/Battery.