Q5 Quattro V6-3.2L (CALB) (2009)
/Page-1747001.png)
Wiring Harness: Removal and Replacement
Terminal 30 Wire Junction 2
Terminal 30 Wire Junction 2
Removing
-
Remove the seal - 3 -.
-
Remove the clips - 1 - from the mounts and remove plenum chamber cover - 2 -.
-
Release the retainer - arrow A - and open the cover - arrow B -.
-
Remove the electrical wires - 1 through 6 - and - 9 and 10 -.
