Q5 Quattro V6-3.2L (CALB) (2009)
-
Remove bolts - 3 -, remove right secondary air combination valve and remove bolts - 1 - for secondary air hose.
Installing
‹› Tightening specifications. Refer to => [ Secondary Air Injection System Assembly Overview ] See: Service and Repair, => [ Secondary air
combination valve heat shield
- tightening specification ] See: Service and Repair
Installation is in reverse order of removal, note the following:
‹› Replace the gasket.
‹› The hose connections as well as the air guide pipes and hoses must be free of oil and grease before installing.
‹› Secure all hose connections with hose clamps appropriate for the model.
‹› In order to be able to securely mount the air guide hoses on their connectors, spray the screws on the previously used clamps with a rust remover.
-
Install the right catalytic converter. Refer to => [ Right Catalytic Converter, with Automatic Transmission ] See: Catalytic Converter/Service and
Repair/Right Catalytic Converter, with Automatic Transmission
-
Install the tower brace.