Q5 Quattro V6-3.2L (CALB) (2009)
Fuel Injector: Service and Repair
Fuel Injectors
Special tools, testers and auxiliary items required
‹› Tool set (T10133)
‹› The puller (T10133/2) was changed and is now called the puller (T10133/2-A). If the new tool is not available, the old one can be modified.
Modify puller (T10133/2) to create the puller (T10133/2-A).
Special tools, testers and auxiliary items required
‹› Round file approximately 6 mm
-
File the semi-circle as shown in the illustration. The semi-circle allows the tool to slide farther onto the fuel injector, thus providing the tool with a
larger contact surface.
-
Mark modified tool with an "A" at the end of the tool number.
High Pressure Fuel Injector, Assembly Overview
1. Radial adjustment - Replace if damaged
2. Combustion chamber seal (Teflon seal) - replace, the seal must not be greased or be handled with any other lubricant during installation
3. Groove on fuel injector