Q5 Quattro V6-3.2L (CALB) (2009)
Fuel Gauge Sender: Diagrams
Fuel Level Sensor, Connector Assignment
-
Disconnect the 5-pin connector on the fuel tank connector flange; procedure.
Terminal Assignment of 5-Pin Harness Connector at Fuel Level Sensor (G)
1. Transfer Fuel Pump (FP) (G6) switched positive
2. Wire connection from fuel level sensor (G) to instrument cluster (sensor mass) - pin 5
3. Wire connection from fuel level sensor (G) to instrument cluster (tank display) - pin 7
4. Wire connection from fuel level sensor (G) to instrument cluster (tank display) - pin 6
5. Transfer Fuel Pump (FP) (G6) ground