Q5 Quattro V6-3.2L (CALB) (2009)
Seat Belt Latch: Service and Repair
Rear Seat Belt Latch In Center Seating Position
Rear Seat Belt Latch in Center Seating Position
Removing
-
Remove the left two third rear seat => [ Rear Seat ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seats.
-
Remove the inner cover on the rear seat backrest => [ Inner Rear Seat Backrest Cover ] See: Body and Frame/Seats/Service and Repair/Removal
and Replacement/Rear Seats.
-
Remove the bolt - 1 - and the seat belt latch - 2 -.
Installing
Installation is reverse of removal, but note the following:
-
If parts of the seat belt system are removed due to an accident, replace the belt system mounting bolts.
-
Mount the belt latch so that the pin fits into the hole in the seat frame - arrow -.
Tightening specifications => [ Rear Belt Latch Assembly Overview ] See: Seat Belt/Testing and Inspection.