Q5 Quattro V6-3.2L (CALB) (2009)
/Page-258001.png)
Arm/Disarm Switch: Service and Repair
Passenger Compartment Monitoring Switch/Alarm System OFF Switch
Removing
-
Switch off ignition and remove ignition key.
-
Carefully pry trim - 1 - out of door trim - arrow - using a small screwdriver - 2 -.
-
Disconnect the electrical connector.
-
Carefully release retaining hooks - arrows - using a small screwdriver.
-
Remove the passenger compartment monitoring switch (E183)/alarm system off switch (E217) - item 1 - back out of trim - 2 -.
Installing
Install in reverse order.
