Q5 Quattro V6-3.2L (CALB) (2009)
Fuel Pressure Sensor: Service and Repair
Fuel Pressure Sensor
Removing
-
Remove upper section of the intake manifold. Refer to => [ Intake Manifold, Upper Section ] See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold, Upper Section.
-
Disconnect electronic connector from the fuel pressure sensor (G247) - 4 -.
-
Remove fuel pressure sensor (G247) - 4 -.
Installing
Installation is in reverse order of removal.
‹› Tightening Specifications. Refer to => [ Intake Manifold, Lower Section, with Fuel Rail Assembly Overview ] See: Engine, Cooling and
Exhaust/Engine/Intake Manifold/Service and Repair/Intake Manifold, Lower Section, with Fuel Rail Assembly Overview
-
Install upper section of the intake manifold. Refer to => [ Intake Manifold, Upper Section ] See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold, Upper Section.