Q5 Quattro V6-3.2L (CALB) (2009)
Installing
-
Install the removed knock sensor.
‹› Tightening specifications affects function of Knock Sensor (KS).
‹› Tightening Specifications. Refer to => [ Ignition Assembly Overview ] See: Powertrain Management/Ignition System/Service and Repair
-
Install lower intake manifold section with the fuel rail. Refer to => [ Intake Manifold, Lower Section, with Fuel Rail ] See: Engine, Cooling and
Exhaust/Engine/Intake Manifold/Service and Repair/Intake Manifold, Lower Section, with Fuel Rail.
-
Reinstall intake manifold upper section. Refer to => [ Intake Manifold, Upper Section ] See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold, Upper Section.