Q5 Quattro V6-3.2L (CALB) (2009)
/Page-1538002.png)
-
Disconnect the electrical connectors - 4 - and remove the electrical wire - 3 -.
-
Release the retainers - arrow - and remove the fuse panel B (SB) - item 1 -.
-
Disengage engine wiring harness at electronics box and lay bare.
-
Remove the alarm horn (H12) if applicable. Refer to => [ Alarm Horn ] See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Alarm Horn/Service and Repair and free up the electrical wiring harness.
