Q5 Quattro V6-3.2L (CALB) (2009)
Fuse Block: Service and Repair
Left Instrument Panel Fuse Panel
Driver Side Top Instrument Panel Cover
Left Instrument Panel Fuse Panel
Removing
-
With ignition switched off, disconnect battery ground wire. Refer to => [ Battery, Disconnecting and Connecting ] See: Battery/Service and
Repair/Removal and Replacement/Battery.
-
Remove the left instrument panel fuse panel C ( SC) Refer to => [ Fuse Panel C with Left Instrument Panel Fuse Panel ] See: Fuse Panel C with
Left Instrument Panel Fuse Panel.
‹› Remove the Driver Side Top Instrument Panel Cover if necessary.
-
Remove the fuses from the fuse panel.
-
Release retaining clips - arrows - and remove the cover from the fuse panel.
-
Remove connector retaining strip - 1 - - arrow - and remove connectors from plug-in socket.
‹› Check the exact assignment for left instrument panel fuse panel in the applicable wiring diagram.
Installing
Install in reverse order of removal, observing the following: