Q5 Quattro V6-3.2L (CALB) (2009)
-
Remove the fuse panel F (SF), disconnecting the cable ties as needed.
‹› For exact assignment of fuse panel F (SF) in the right of the luggage compartment, see the applicable wiring diagram.
Installing
‹› Tightening specification. Refer to => [ Engine Compartment E-Box, Wire Junction, Fuse Holder and Battery Assembly Overview ] See: Engine
Compartment E-Box, Wire Junction, Fuse Holder and Battery Assembly Overview.
Install in reverse order of removal, observing the following:
-
Insert the fuse panel F (SF) - item 1 -, making sure the guides - 2 - are inserted in the mounts correctly - arrows -.
-
Connect the battery. Required actions. Refer to => [ Battery, Disconnecting and Connecting ] See: Battery/Service and Repair/Removal and
Replacement/Battery.