Q5 Quattro V6-3.2L (CALB) (2009)
/Page-1801004.png)
-
Route the pressure line - 4 - between the connector - 2 - and the engine mount - 3 -.
-
Tighten the retaining bracket - 5 - on the threaded pin - 1 - using the nut - 6 -.
Return line bracket to the subframe
-
Install return line - 1 - on the longitudinal member threaded pins - 2 - using the clips - 5 -.
-
Install return line - 1 - with the colored markings - arrows - in the clips - 5 -.
