Q5 Quattro V6-3.2L (CALB) (2009)
1. Torque wrench 5 - 50 Nm (V.A.G 1331) with extension
2. 17 mm Ring Spanner Insert, Open (V.A.G 1331/10 )
3. Pressure line with union nut
4. A/C Compressor
-
If the pressure line is also attached to the A/C compressor, then tighten the bolt - C - for the bracket - D -.
-
Clean oiled places in engine compartment.
-
Align the marking - arrow - made on the belt pulley to the marking made on the hub.