Q5 Quattro V6-3.2L (CALB) (2009)
/Page-1808005.png)
-
Remove the clamp - 4 - from the intake hose - 3 -. Remove the suction hose - 3 -.
-
If the pressure line is also attached to the A/C compressor, then remove the bolt - C - for the bracket - D -.
-
Remove the bolts - 1 - and pull the pressure line - 2 - out of the power steering pump.
-
Seal the power steering pump and line connections using clean sealing plugs.
-
Remove the power steering pump from the bracket. Remove the front bolts - 1 - and rear bolt - 2 -.
