Q5 Quattro V6-3.2L (CALB) (2009)
Specification for delivery pressure: 125 to 132 bar
If the pressure is not at the specified value, replace the power steering pump => [ Power Steering Pump, with Dynamic Steering ] See: Service and
Repair/Power Steering Pump, with Dynamic Steering or => [ Power Steering Pump, without Dynamic Steering ] See: Service and Repair/Power
Steering Pump, without Dynamic Steering.
-
Switch off engine.
-
Remove Power Steering Test Unit (V.A.G 1402 ).
Tightening specifications => [ Without Dynamic Steering Assembly Overview ] See: Service and Repair/Without Dynamic Steering Assembly
Overview
-
Note the line installation location when bolting the line connection. The markings - 1 - and - 2 - must be opposite each other.
-
Tighten union nut - 1 -. Counterhold at the hex head.
-
Tighten nut - 3 - and the rubber bushing - 4 - if necessary.