Q5 Quattro V6-3.2L (CALB) (2009)
-
Attach tools and rubber bonded bushing at subframe, as shown in illustration.
1. Spindle (3346/2)
2. Washer (3346)
3. Tube (T40185/1). Side "A" must face the subframe.
4. Bonded rubber bushing
5. Subframe
6. Tube (T40185/2). Side "A" must face the subframe.
7. Assembly tool (3301)
8. Nut (3346/3)
-
Pull bearing into subframe until stop.
-
Check for paint damage on the subframe.
‹› If paint damage has occurred during bearing replacement, repair using corrosion protection, primer and black top coat.