Q5 Quattro V6-3.2L (CALB) (2009)
Rear Knuckle: Service and Repair
Wheel Bearing Housing, Wheel Bearing Unit, Shock Absorber Coil Spring Assembly Overview
Wheel Bearing Housing, Wheel Bearing Unit, Shock Absorber Coil Spring Assembly Overview
1
Drive axle
‹› Different versions
2
Backing plate
3
Bolt
‹› Tightening specification, refer to => [ Fastener Tightening Specifications ] See: Specifications/Rear Suspension
4
Upper control arm
5
Nut
‹› 95 Nm
‹› Always replace after removal
‹› Must be tightened in the curb weight position, refer to => [ Wheel Bearing, with Coil Spring, Lifting to Curb Weight Position ] See: Service
and Repair/Rear Suspension/Wheel Bearing, with Coil Spring, Lifting to Curb Weight Position
6
Eccentric washer
7
Bolt