Q5 Quattro V6-3.2L (CALB) (2009)
Acceleration Sensor: Service and Repair
Front Body Acceleration Sensors
Front Body Acceleration Sensors
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1410)
Removing
-
Vehicle, Raising
-
Release and remove connector - 2 -.
-
Remove nuts - 1 - and remove the sensors - 4 - from the bracket - 3 -.
Installing
Installation is in reverse order of removal. Observe the following when doing so:
When installing, always pay attention to the installation position of the sensor.
-
Install sensor - 4 - as illustrated.
-
Tighten nuts - 1 - to 8 Nm.