Q5 Quattro V6-3.2L (CALB) (2009)
20
Shock absorber fork
‹› Shock Absorber Fork, Removing and Installing, refer to => [ Shock Absorber Fork ] See: Suspension Strut / Shock Absorber/Service and
Repair/Removal and Replacement/Front Suspension/Shock Absorber Fork
21
Bolt
‹› 40 Nm plus an additional 90° turn
‹› Always replace after removal
‹› Must be tightened in the curb weight position, refer to => [ Wheel Bearing, with Coil Spring, Lifting to Curb Weight Position ] See: Service
and Repair/Front Suspension/Wheel Bearing, with Coil Spring, Lifting to Curb Weight Position
22
Coupling rod
‹› Note installed position, refer to => [ Coupling Rod ] See: Stabilizer Bar/Service and Repair/Front Suspension/Coupling Rod
23
Bolt
‹› 40 Nm plus an additional 180° turn
‹› Always replace after removal
24
Nut
‹› Always replace after removal
25
Suspension Strut
‹› Suspension Strut with Mounting Bracket, Removing and Installing, refer to => [ Suspension Strut with Mounting Bracket ] See: Suspension
Strut / Shock Absorber/Service and Repair/Removal and Replacement/Front Suspension/Suspension Strut with Mounting Bracket
‹› Suspension Strut and Mounting Bracket, Servicing, refer to => [ Suspension Strut with Mounting Bracket, Servicing ] See: Suspension Strut /
Shock Absorber/Service and Repair/Removal and Replacement/Front Suspension/Suspension Strut with Mounting Bracket, Servicing
‹› Note different types of suspension versions, see vehicle data plate, refer to => [ Explanations of the Production Control Numbers (PR Number)
] See: Application and ID.
‹› Faulty shock absorbers must be vented and emptied before disposal, refer to => [ Shock Absorbers, Removed, Checking ] See: Suspension
Strut / Shock Absorber/Testing and Inspection/Shock Absorbers, Removed, Checking
‹› Check removed shock absorber, refer to => [ Shock Absorbers, Removed, Checking ] See: Suspension Strut / Shock Absorber/Testing and
Inspection/Shock Absorbers, Removed, Checking
26
Right additional reinforcement
‹› Removing and installing => [ Remove the right or left additional
reinforcements. ] See: Strut / Shock Tower/Strut Tower Brace/Service and Repair/Front Suspension
27
Bolt
‹› 40 Nm plus an additional 90° turn
‹› Follow tightening sequence => [ Tightening specification of threaded connection
depicted as numbered is mandatory. ] See: Suspension Strut / Shock Absorber/Service and Repair/Removal and Replacement/Front
Suspension/Suspension Strut with Mounting Bracket
‹› Always replace after removal