Q5 Quattro V6-3.2L (CALB) (2009)
/Page-1895002.png)
-
Remove bolt - 1 -.
-
Remove bolts - 2 -. Do not bend upper retaining plate when doing so.
-
Remove level control system sensor.
‹› Only sensors of the same version may be installed.
-
Adapt replacement part accordingly and install.
-
Install bolts - 2 -. Do not bend upper retaining plate when doing so.
‹› Hold Level Control System Sensor securely when tightening bolts - 2 -.
Sensor lever must point outward.
-
Install the bolt - 1 -.
