Q5 Quattro V6-3.2L (CALB) (2009)
-
Remove the screws for the anti-twist mechanism bracket and remove the Pressure Plate with Swivel Bearing (VAS 6274/11-1), the Anti-Twist
Mechanism Oblong Holes (VAS 6274/11-5 ) and the Spacer (VAS 6274/11-4).
-
Slide the locking lever - 1 - back.
-
Remove the Piston (VAS 6274/4) - 2 - and the T-Handle (VAS 6274/5) - 3 - and remove the Pressure Plate with Securing Plate (VAS
6274/11-2), the Anti-Twist Mechanism with Screws (VAS 6274/11-6) and the Spacer (VAS 6274/11-4) from the coil spring.
-
Release the coil spring completely.
Installing
Installation is in reverse order of removal. Observe the following when doing so:
It takes more than 4 turns to tension the coil spring with the pressure plates.
-
Insert the bottom side of the coil spring in the Spring Tensioning System (VAS 6274).