Q5 Quattro V6-3.2L (CALB) (2009)
-
Install union nut - 1 - on Tire Pressure Sensor - 2 -. When doing this, press the sensor into the bed and hold it there.
CAUTION!
‹› When tightening the union nut, avoid excessive pressure on the nut and on the tool
-
Press Tire Pressure Sensor - 1 - onto rim well and tighten union nut. Refer to => [ Tire Pressure Monitoring Sensor Assembly Overview ] See:
Tire Monitoring System/Service and Repair/Removal and Replacement/Tire Pressure Monitoring Sensor Assembly Overview.
‹› After installing, Tire Pressure Sensor must lie firmly in its bed.
‹› Sealing washer - arrow - becomes slightly deformed when doing this.