Q5 Quattro V6-3.2L (CALB) (2009)
/Page-1212002.png)
‹› Make sure no components or other objects fall into the shift mechanism. The shift mechanism must be replaced if that happens.
-
Release the retaining tabs - 2 - and - 3 - in direction of - arrow - and raise the front of the cover - A - slightly and hold it in that position.
‹› This prevents the retaining tabs from engaging again.
-
Using a screwdriver, release the upper retaining tab - 1 - on the cover in direction of - arrow - over the bracket - B - and remove the cover - A -
upward.
-
Disconnect electrical connector on the Shift Lock Solenoid (N110).
-
Push hook - A - in direction of - arrow - and hold it.
‹› Replace the shift mechanism function unit if a retaining hook - A - is broken off.
-
Tip Shift Lock Solenoid (N110) down and out in direction of - arrow - so the ball head - 1 - disengages from the operating lever on the shift
mechanism.
