Q5 Quattro V6-3.2L (CALB) (2009)
‹› Ignore - 1 - and - arrows 3 and B -.
-
Remove dual mass flywheel. Refer to => [ Dual Mass Flywheel ] See: Service and Repair/Overhaul/Dual Mass Flywheel.
Installing
Install in reverse order, paying attention to the following:
‹› Tightening specification. Refer to => [ Front Final Drive Sealing Rings Assembly Overview ] See: Front Final Drive Sealing Rings Assembly
Overview.
-
Always clean the left flange shaft, the transmission housing in the area where the differential is accessed - arrow A - and the shaft seal - arrow B
-.