Q5 Quattro V6-3.2L (CALB) (2009)
/Page-1276002.png)
Install in reverse order, paying attention to the following:
-
Let the Selector Lever Sensor System Control Module (J587) engage with the 4 retaining tabs - arrows -.
-
Secure Selector Lever Transmission Range (TR) Position Display (Y26) electrical wiring - arrows -.
-
Install the front ashtray.
-
Install selector lever handle. Refer to => [ Selector Lever Handle ] See: Shifter A/T/Service and Repair/Removal and Replacement/0B5A
Transmission/Selector Lever Handle.
