Q5 Quattro V6-3.2L (CALB) (2009)
Shift Cable: Removal and Replacement
Selector Lever Cable
Selector Lever Cable
Special tools, testers and auxiliary items required
‹› Pry lever (80 - 200)
‹› Trim removal wedge (3409)
‹› Socket and key (T40031)
Removing
-
Press the button for the parking brake to lock the electromechanical brake.
-
Place selector lever in the "D" position.
-
Carefully pry the selector lever boot up on the sides using the trim removal wedge (3409) or a small screwdriver - arrows - and fold it up.
-
Loosen the bolt on the selector lever cable approximately one turn through the opening - arrow - in the shift mechanism using the socket and key
(T40031).