Q5 Quattro V6-3.2L (CALB) (2009)
Shifter A/T: Removal and Replacement
Selector Lever Transmission Range Position Display
Selector Lever Transmission Range Position Display
Removing
-
Press the button on the parking brake to lock the electro-mechanical brake.
-
Place selector lever in position "S".
-
Carefully pry out the selector lever boot on the side using the Trim Removal Wedge (3409) - arrows - and fold it upward.
-
Release the retaining spring - 2 - and remove the Selector Lever Transmission Range Position Display Unit (Y26 ) - 1 - - arrow -.
-
Disconnect electrical connector.
Installing
Installation is in reverse order of removal.