Q5 Quattro V6-3.2L (CALB) (2009)
Torque Converter: Removal and Replacement
Torque Converter
Torque Converter
Special tools, testers and auxiliary items required
‹› Extractor (T40176)
‹› Grease for clutch disc shaft splines (G 000 100 )
Removing
‹› The transmission is secured on the engine and transmission holder (VAS 6095). Refer to => [ Securing Transmission to Engine and Transmission
Holder ] See: Service and Repair/Procedures/0B6A Transmission/Securing Transmission to Engine and Transmission Holder.
-
Remove left drive flange. Refer to => [ Left Flange Shaft ] See: Differential/Differential Output Shaft/Service and Repair/Left Flange Shaft.
-
Secure the extractor (T40176) on the torque converter - A - using the nut - B -.
-
Rotate the extractor (T40176) upward.
‹› To prevent the torque converter from tilting, counter hold it underneath as illustrated.
‹› Pay no attention to - arrow -.
-
Remove the torque converter from the input shaft - arrows -.