Q5 Quattro V6-3.2L (CALB) (2009)
22
Bolt
‹› 8 Nm
23
ATF oil pipes
24
ATF oil pipes
25
O-Ring
‹› Replace
26
O-Ring
‹› Replace
27
ATF filter
‹› Refer to => [ ATF Filter ] See: Fluid Filter - A/T/Service and Repair/Removal and Replacement/0B5A Transmission/ATF Filter
28
Gasket
‹› Replace
‹› Installing => [ Installing ] See: Fluid Pan/Service and Repair/0B5A Transmission
29
ATF oil pan
‹› Refer to => [ Automatic Transmission Fluid Oil Pan ] See: Fluid Pan/Service and Repair/0B5A Transmission
ATF oil pan, tightening specification and sequence
-
Tighten bolts in 2 stages as follows:
-
Install bolts - arrows - hand-tight.
-
Tighten bolts - 1 through 15 - diagonally and in steps to 10 Nm.
Mechatronic, tightening specification and sequence