Q5 Quattro V6-3.2L (CALB) (2009)
/Page-1333003.png)
-
Remove ATF oil pan. Refer to => [ Automatic Transmission Fluid Oil Pan ] See: Fluid Pan/Service and Repair/0B5A Transmission.
-
Place Used Oil Collection and Extraction Device ( V.A.G 1782) under transmission.
-
Carefully pull the ATF filter to the rear and off the mechatronic - arrow -.
CAUTION!
There is a risk of destroying the transmission control module (Mechatronic) with static discharge.
‹› Always discharge "static electricity". Do this by touching a grounded object, e.g. vehicle ground, the vehicle or the hoist.
‹› Do not touch contacts in transmission connector with hands.
-
Disconnect the connector by pulling the locking clip - arrow 1 - and pushing the release downward - arrow 2 -.
-
Remove bolts - 1 through 6 -.
