Q5 Quattro V6-3.2L (CALB) (2009)
Seals and Gaskets: Service and Repair
Flange/Driveshaft Seal
Flange/Driveshaft Seal
Special tools, testers and auxiliary items required
‹› Adapter (VW 295 A)
‹› Pressure Plate (VW 402)
‹› Punch (VW 408 A)
‹› Support Channels (VW 457)
‹› - 3 - Separating Device 22 to 75 mm, e.g. (Kukko 17/1)
Press the Protective Ring - A - off the Flange/Propshaft.
B Separating device 12 to 75 mm, e.g. (Kukko 17/1)
Installation location of the protective ring - A - on the flange/propshaft
‹› Insert the protective ring - A - with the ridge - arrow 1 - in the groove - arrow 2 - on the flange - B -. The smaller outer diameter - arrow 3 -
faces toward the flange.
Press the protective ring - A - onto the flange/propshaft.