Q5 Quattro V6-3.2L (CALB) (2009)
-
Remove circlip.
-
Press inner CV joint off of drive axle with the tool shown in illustration.
1. Pressure Plate (VW 401) or Pressure Plate (VW 402)
2. Punch (VW 408 A)
-
Remove spring plate => [ (Item 13) Dished washer ] See: Service and Repair/Removal and Replacement/Rear Suspension/Drive Axle with 89 mm
Outer Constant Velocity Joint and 100 mm Inner Constant Velocity Joint Assembly Overview from the shaft, where applicable.
-
Pull joint protective boot off from driveshaft.
Inner Constant Velocity Joint, 100 mm or 107 mm, Installing