Q5 Quattro V6-3.2L (CALB) (2009)
Shift Indicator: Service and Repair
Selector Lever Transmission Range Display with Selector Lever Scale Illumination
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
Removing
-
Pull the parking brake button to lock the electromechanical parking brake.
-
Shift the selector lever into the "S" position.
-
Switch ignition off.
-
Carefully pry the selector lever boot out at the side using a trim removal wedge (3409) or a small screwdriver - arrows -.
-
Fold selector lever boot upward.
-
Release retaining spring - 2 - and remove Selector Lever Transmission Range Display (Y26) - item 1 - - arrow -.
-
Disconnect the electrical connector.
Installing
Install in reverse order.