Q5 Quattro V6-3.2L (CALB) (2009)
Rear Door Window Regulator: Service and Repair
Rear Window Regulator
Window Regulator
1
Window regulator
‹› Removing
‹› Door trim removed.
‹› Window regulator motor removed. Refer to=> [ Window Regulator Motor ] See: Power Window Motor/Rear Door Window Motor/Service
and Repair/Rear Window Regulator Motor.
‹› Door glass removed. Refer to=> [ Front Door Window ] See: Window Glass/Front Door Window Glass/Service and Repair
‹› Door cover removed. Refer to=> [ Door Cover ]
-
Release the window regulator motor threaded pins and push it through the inside panel.
-
Only loosen the upper nut.
-
Remove the lower nuts and lift the window regulator out of the key hole.
-
Remove the window regulator through the opening in the door inner panel.
2
Door
3
Nut