Q5 Quattro (8RB) V6-3.2L (CALB) (2011)
Power Distribution Module: All Technical Service Bulletins
Lighting - Turn Signal 'Auto-Blink' Is Inoperative
94 Auto-blink is inoperative
57 10 37
2024716/1
November 18, 2010
Affected Vehicles
Condition
The auto-blink feature is inoperative; however, the turn signals function normally.
TECHNICAL BACKGROUND
The auto-blink feature was not activated when the comfort control unit, J393, was programmed.
This feature triggers the turn signals to blink three times after moving the turn signal lever (up or down) to the point of resistance and then immediately
releasing it. This feature is used when changing lanes on the highway.
PRODUCTION SOLUTION
Comfort control unit correctly adapted to include auto-blink feature.
SERVICE
With scan tool 505X, select guided functions and follow directions below to activate the auto-blink feature in the comfort control unit J393 (address code
46) for all remote keys in adaptation channels 1 - 4.
1. Select 46-comfort control unit and forward arrow.