Q7 Quattro V6-3.6L (BHK) (2007)
-
Remove windshield wiper motor. Refer to => [ Windshield Wiper Motor with Wiper Motor Control Module ] See: Wiper and Washer
Systems/Wiper Motor/Service and Repair.
-
Remove E-Box plenum chamber cover - arrows -.
-
Disconnect electrical multi-pin connectors - 2, 3, 5, 6, 7, 8, 9 - on E-Box plenum chamber connector station.
-
Remove connector - 10 - from E-box plenum chamber.
-
Remove both wiring harnesses - 1 - and - 4 - from E-box plenum chamber mount.
-
Remove E-box plenum chamber upward out of retaining pins.
-
Remove screw - 5 - and remove Alarm Horn (H12) from plenum chamber.